https://doi.org/10.1140/epje/s10189-025-00493-4
Tips and Tricks - Flowing Matter
Droplet-on-demand using a positive pressure pulse
1
Gulliver UMR 7083 CNRS, ESPCI–PSL, 10 rue Vauquelin, 75005, Paris, France
2
IPGG, 6 rue Jean-Calvin, 75005, Paris, France
3
Department of Physics & Astronomy, University of Manchester, M13 9PL, Manchester, United Kingdom
Received:
6
April
2025
Accepted:
8
May
2025
Published online:
2
July
2025
Droplet generation under steady conditions is a common microfluidic method for producing biphasic systems. However, this process works only over a limited range of imposed pressure: beyond a critical value, a stable liquid jet can instead form. Furthermore, for a given geometry, the pressure conditions set both the generation rate of droplets and their volume. Here, we report on-demand droplet production using a positive pressure pulse to the dispersed-phase inlet of a flow-focusing geometry. This strategy enables confined droplet generation within and beyond the pressure range observed under steady conditions, and decouples volume and production rate. In particular, elongated plugs not possible under steady conditions may be formed when the maximal pressure during the pulse reaches the jet regime. The measured volume of droplets-on-demand as well as the onset of droplet generation are both captured with a simple model that considers hydraulic resistances. This work provides a strategy and design rules for processes that require individual droplets or elongated plugs in a simple microfluidic chip design.
© The Author(s) 2025
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
