Eur. Phys. J. E (2019) 42: 34
https://doi.org/10.1140/epje/i2019-11795-9

Regular Article

The influences of “gas” viscosity on water entry of hydrophobic spheres

¹ School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University, 710129, Xi’an, Shaanxi, China
² School of Marine Science and Technology, Northwestern Polytechnical University, 710072, Xi’an, Shaanxi, China
³ Department of Mathematics, Virginia Polytechnic Institute and State University, 24061-0123, Blacksburg, VA, USA

^* e-mail: xchen76@nwpu.edu.cn

Received: 11 October 2018
Accepted: 12 February 2019
Published online: 21 March 2019

Abstract

An extremely thin gas film was found between a sphere and a free surface when the sphere impacted onto a water pool. That might influence the generation and evolution of water entry cavity. However, it is quite difficult to be captured through normal numerical and experimental tests. In this work, by using a finite element method we investigate the water entry of a hydrophobic sphere with gas viscosity artificially increased. The air film rupture in the early stage, contact line dynamics on a curved solid surface, and air pocket formation are investigated. The numerical results reveal that the lifetime of the gas film can be predicted by a viscous squeezing flow model qualitatively well. That relates to the fact that the gas film is much thinner than the diameter of the sphere, even when the gas viscosity is 100 times as large as the liquid one. However, inviscid flow can be found in the most part of the liquid bulk. The free surface profile (or the gas film profile) is then determined by the impact speed, namely the Weber number. More importantly, after the “gas” film ruptures at the bottom of the sphere, a contact line is generated. The contact line retracts along the sphere's surface, and the retracting speed fulfils law generally. This implies that the retracting process of the gas film is dominated by the inertia-capillary balance, rather than simply by the visco-capillary.